Onyx: Sansin 2024 Color of the Year

Sansin SDF Onyx - project by Northland Blasting and Log Restoration

 Sansin has announced Onyx as their 2024 color of the year. In deciding, they conducted an
analysis of some of the unique projects and photos. Onyx performs beautifully on a variety of wood substrates and is demonstrated in a number of Sansin’s exterior formulations including Classic, SDF, Dec, and ENS. Onyx is a confident, courageous color and pairs well with many unique Sansin colors such as Aztec, Chesapeake, and Primary Yellow. Even the deep charcoal color of Onyx doesn’t sacrifice what we all love most about building with wood – the character. Onyx highlights the wood grain while protecting the wood from UV and water damage.

Schroeder Log Home Supply, Inc.
1101 SE 7th Avenue
Grand Rapids MN 55744

Capture Log Stain by Sashco

 

Capture Log Stain by Sashco is a log finish that is extremely effective and attractive semi-transparent stain that is followed by a weather repellent topcoat, Cascade. Capture Log Stain and Cascade work together. Both are freeze-thaw stable in their containers through at least 5 freeze-thaw cycles (freezing in the container, rethawing, then freezing again, etc.) Modest sheen gives "depth" to the appearance of logs (when used in conjunction with the Cascade clear topcoat). Capture Log Stain’s unique elastic formula allows it to move freely as your logs move, instead of cracking and peeling. Two heavy coats of Capture Log Stain are now recommended, especially for Autumn Aspen, Bronze Pine, Natural, Wheat, and other light colors. Capture also works well by itself as a one coat interior stain or can be top-coated with Symphony. Capture Log Stain and Cascade are compatible with other Sashco products like PeneTreat (Tim-bor), Conceal, Log Builder Caulking, and Log Jam Chinking. Made in the USA. 

Grand Rapids, Minnesota. Pickup in store - or ship to your door -in whichever woods your cabin dwells.

Stopping Carpenter Bees from Boring Logs and Timber

 Carpenter Bees

For Log Homes, the large carpenter bees or Xylocopa do the most damage, boring approximately 1/2" diameter tunnels into logs and other wood surfaces including decks, overhangs, fence rails, etc. Carpenter Bee tunnels become a threat for infestation of wood-decaying fungi or other insects, such as carpenter ants.

Treatments: Insecticidal sprays and dusts such as those included in the Carpenter Bee Kit are available. These types of products may need to be applied every couple of weeks for awhile to ensure effectiveness. Apply them at night while the hive is asleep for maximum impact. Beware that some insecticides have been banned but not yet removed from store shelves. Consider the potential health risks of using such poisons in your home (young children are the most susceptible). If you have an exterminator do the job professionally, find out what they are using and if those insecticides have been banned in your area. If you are having or have had problems with Carpenter bees, consider adding NBS 30 to your finish when you recoat your house again. If chemicals aren't your bag, you can give the kids a project with a couple of fly swatters. The males don't sting and the females are known to be more reluctant to stinging, unlike other bees, wasps, and hornets

However you choose to rid your logs of carpenter bees, consider spraying Tim-bor or Shell Guard RTU in the tunnels afterwards to help guard against wood-decaying fungi. Just mix up some Tim-bor in a spray bottle, pump sprayer, or squeeze bottle and administer it into the holes. Also, be sure to seal off the tunnel entrances by pounding in wooden dowels or by using Caulking, wood putty, or by mixing WoodEpox and sawdust.

Protect Your Home with BEE Gone® Insecticide Concentrate for Control Against Carpenter Bees and other Wood-destroying Insects like Bark Beetles and Carpenter Ants. Also use for Spiders, Ticks, Wasps, and many other insects! Guard against those damaging and destructive outdoor pests with BEE Gone®, an EPA-registered pyrethroid insecticide. Around your home and residential outbuildings, it effectively controls carpenter bees and other wood-destroying insects. For easy spray-on application, BEE Gone also mixes readily with water. Available in a convenient 8 oz. bottle that mixes with a 5 gallon pail of water to spray with a garden pump sprayer. See Directions for full details. Made in the USA.  Bee Gone Directions |  SDS

• EPA-registered and effective pyrethroid insecticide.
• Controls carpenter bees and wood-destroying insects.
• Works as a perimeter treatment for outdoor pests around residential buildings.
• Can be easily mixed with water for spraying.
• Designed for wooden structural surfaces on home’s exterior.
• For outdoor homeowner use only.

 

Schroeder Log Home Supply, Inc.
1101 SE 7th Avenue
Grand Rapids MN 55744

www.loghelp.com

Tips to Get The Most From Your Log Home Finish

Clean, dry, and open-pored-- the way to get the best performance out of your log finish, regardless or the brand, color, or formula, is proper preparation of the surface. For new logs or log siding, that means blasting or sanding the surface at 60-80 grit to remove the mill glaze (a thin film that will block your stain penetration) and open the wood cells. For refinishing over a stained log that has been properly maintained, that might mean a simple wash and reapplication of the finish.

The surface should be clean and dry before finishing, but the best choice of cleaning agent may differ depending on wood species, surface condition, and the finish that will be applied. For example, an oxygen bleach like CPR is a great cleaner for log prep, however it can shift the color of woods high in tannin or flavonoid; e.g., oak might turn dark, Douglas fir might turn pink. Always check the data tech for your finish for the recommended cleaner, and always try a small test area on the actual surface before advancing.

If you plan on using a preservative, such as Tim-bor or Boracol, apply it and allow to dry before applying the finish. Borate preservatives are a relatively affordable step of insurance to deter future fungal decay and insect infestation.

When choosing a finish, more pigment will provide greater UV protection and greater longevity- however too much pigment will mask the wood. Paint and solid stains on logs are not recommended-- firstly because they can hide and prevent remedy of underlying issues such as decay; and secondly, because we think that wood is too beautiful to hide!

Read the application data for the product being used and apply the recommended number of coats to increase UV protection. In most cases the first coat going into the wood should be the heaviest saturation. If spraying the finish, back-brush vigorously for proper adhesion and to force it into any small cracks.

Apply the finish at temperatures in the range of 50°F to 90°F. Surface temperatures below or above this range can hinder absorption and shorten the life of the finish. Wind and direct sunlight can also dry a finish too quickly.

In addition to proper preparation and application, another important consideration to get the most life out of a finish is not to let it go too long without its needed maintenance coat. It’s advisable to give the home a walk-around once per year and inspect the integrity of the finish, especially on the south, west, or sun-exposed areas. Wash and touch-up the finish as-needed, which on average is 3-5 years on the sun-exposed areas.

Log Keepers

 

As the warmer season draws to a close, we are often frantic to wrap up unfinished summer projects. Sometimes the end of the season may leave us with raw, untreated logs or siding left unstained or unsealed for one reason or another. If the wood has been prepped and cleaned, perhaps even a borate preservative applied, but there’s no time to choose or apply stain before the good weather runs out, a log keeper might be a good option. There are a few choices available on the market with their various advantages, but generally these clear or lightly tinted primers can protect your wood while buying some extra time to get the final finish on. Most can be applied to higher moisture content wood and will help to reduce water absorption, graying from UV damage, and mold or mildew growth. Below are a few options that we carry for a first step in protecting your logs while they wait to be finished.

Colorfast

Prevents mold and yellowing due to UV damage on new wood as it moves from the mill to the job site and throughout construction. Contains both mildewcide and algaecide to help preserve the wood until it’s time to stain. Or, life happened and you need to wait for a few weeks between prep and staining? No problem.

Before staining, Colorfast evens out wood porosity, creating a smoother surface for stain application and preventing over-absorption and a too-dark color. After staining, the lignin stabilizers prevent the wood underneath from getting sunburned, leaving the stain or clear coat applied on top looking the same year after year.

 

Organiclear™ TM-5 First Treat wood coating is used to protect newly debarked (green) logs and timber during processing, storage, and delivery. TM-5 First Treat protects against Mold, Mildew, and Fungus and three way protection from Rain, Fading, and Weather. (Optimal protection is afforded against discoloration from UV rays.) The special one-coat water based formulation penetrates deep into the interior of green wood. TM-5 First Treat is a concentrate that can be diluted with two parts water, or 1:1 for high moisture woods such as Norway Pine or Aspen. TM-5 First Treat is designed for dipping, though spraying works well. If you choose to dilute at 2:1, it may require monitoring logs for additional coatings. 

 

Sansin Foundation is a penetrating base coat that offers up to 6 months of complete wood protection against weathering and UV during construction. Even better, it dramatically enhances top coat performance without extensive preparation – simply wash and apply the appropriate product over Foundation as directed. Foundation is perfect for both interior and exterior wood surfaces like timbers, logs and lumber. It penetrates naturally, carrying solids deep into the wood where they form a monolithic bond with the wood tissue. This increases dimensional stability, reducing checks and wood movement. In addition to protecting against harmful UV radiation, it enhances the natural moisture resistance of wood surfaces without causing adhesion issues for subsequent top coat applications. Classic Foundation & SDF Foundation formulas are available in Ready to Use formulations that are milky when wet and dry clear.

Sansin Timber-Tec is a concentrated, penetrating wood protection system, offering an effective guard against weathering while providing active UV protection. Timber-Tec contains a proprietary mix of ingredients that protects against sapstain (or bluestain), mold, mildew, and fungi. Suggested for use on logs, timbers, and wood joinery products. Sansin Timber-Tec is intended as a priming application for logs 24-48 hours after being drawknifed and should be applied to clean logs that are not in ground contact. Sansin Timber-Tec can not be applied over previously finished or stained wood. Timber-Tec is available in two transparent formulas:

• M-30 provides the natural light color of fresh pine. 

• C-20 is a clear concentrate that provides a light honey color to the wood once it has dried. 

Sansin Timber-Tec contains solids that penetrate well, creating dimensional stability and water repellency and greatly minimizes cracks and checking. Sansin Timber-Tec provides active U.V. protection keeping wood pure during the construction phase. Note: If applied by spraying, it must be back brushed for proper application. Timber-Tec must also be power washed off of the logs before applying finish. *On some surfaces it will not be easily removed with powerwashing and may require a chemical stripper like Log-Gevity Citrus Strip or sanding.

Sansin Boracol: Diffusable, long-term decay, insect and mold protection

By Sjoerd Bos, Managing Director at Sansin

Wood is an incredibly strong building material, but it must be protected properly to stand the test of time, and that means protecting it against wood-destroying fungi, insects and mold. Sansin Boracol 20-2 is designed to do just that - fight fungi and insect infestation. It is recommended for use on roof, floor or structural timbers, joinery, joist ends, and door and window framing. Boracol 20-2 penetrates wood exceptionally well – even heartwood, up to 3-5mm deep. It establishes a reserve from where further penetration takes place (up to 40 mm over two years in dry wood).

Because Boracol diffuses with moisture, it migrates into areas with higher moisture content. Boracol can also be used to eradicate wood rot in existing structures, and it can also be used to protect new and existing logs and timbers against fungi and wood-boring insect. In addition to organic surfaces such as wood, Boracol works to prevent mold on inorganic materials like stone or concrete. Sansin Boracol contains boron, which is far less hazardous than traditional treatments and will give your project the lasting protection it needs – with low toxicity.

 The Science Behind Boracol

 Premature decay of untreated wood that was periodically or permanently exposed to increased moisture content (over 25%) reached serious proportions in North America in the mid-2000s. As a result, requirements for reliable treatments were introduced. Boron-based wood preservatives were found to be the most acceptable pre- and remedial treatment for rot and insect attack.

In addition to their proven efficiency, the borate formulations are widely accepted as environmentally safe wood preservatives, having very low toxicity. Boracol wood preservatives are based on inorganic Boron (disodium octaborate tetrahydrate), which not only has the ability to diffuse in moist wood but also contains a very low vapor pressure and has the ability to progressively penetrate the wood even several years after application. Over this time, because of the boron concentration in the wood, the degrading organisms have no chance to survive and cause damage.

The only condition for proper performance is that the treated wood should not be exposed to direct contact with water (i.e. wood-in-ground contact or occasional heavy rain over construction wood). If the wood is exposed to water in this way, it is possible the Boron will “travel the opposite way” by a leaching process. To keep this from happening, a post-treatment application of the wood surfaces is recommended by applying a proven wood protection system like Sansin SDF, DEC or Classic 1-2-3. 

How to Apply Boracol 

Boracol can be applied by brushing, dipping or spraying. Within the first 24 to 48 hours, the product will penetrate 3-5 mm deep into the wood and will establish a reserve of over-concentrated Boron from which further penetration and diffusion will take place depending on the wood’s moisture content.

Brush Application: This method requires some shear force to be applied in order to evenly spread the product over a range of different surface profiles. The brushing method yields best results if applied before wood components are assembled. 

Dipping: This method requires a non-corrosive dipping tank and an additional support surface inclined at an angle to allow excess product to drain off into the tank. The advantage of this method is that all the surfaces – including splits and cracks – are fully treated.

Spraying: Different spray applicators can be used, and the viscosity of the product can be adapted by adding up to 5% water. 

Injection Method: This method is used to increase the quantity of Boron in wood locations where condensed water may be trapped for a longer period. A syringe-type injector can be used to fill cracks and gaps or pre-drilled holes.

It is advised to clean the wood before treatment. Vacuum cleaning, power washing or compressed air are good ways to remove dirt. Boracol forms a wet-appearing film on wood surfaces as soon as the product is applied. The film will stay on wood for a period necessary for the solvent to penetrate the wood surface, bringing the Boron compound deeper in the wood. During this time, the treated wood surfaces should be protected from contact with water.

If the treated wood is intended for subsequent paint or stain application, allow at least seven days for Boracol to completely penetrate and disappear from the surface. If a slight film or crystal-like particles are visible, the surface should be wiped off with a damp cloth. Light sanding can be very helpful to remove boron crystals and improve adhesion of the coating. Subsequent coating is particularly important when wood is exposed to contact with rain or con-densed water that stays trapped in the wood for a longer period of time (e.g. balconies). To learn more about Sansin Boracol 20-2, click here.

Indelible Ink Pencil

 The Sanford NOBLOT Ink Pencils have been discontinued but have been now replaced with this indelible successor. The lead writes as if it were ordinary smooth dark grey graphite lead, but it is indelible. In fact, it is a seductively smooth-writing "graphite" pencil, and you must be careful to separate it from regular graphite pencils. If you write very lightly and erase very carefully with a vinyl eraser in a dry environment, the markings will erase. The indelibility is due to the dyeing of the surface written upon, which is "fixed" by writing firmly, by the rubbing action of mechanical erasure, and further intensified by dampening or exposure to humid environments (your "hot, foggy" breath close to the markings will do). To assist you in keeping this lead away from anything you do not want permanently marked, we supply a point protector with each pencil.

This lead does not break as easily as our Veritas indelible pencil leads, but a little more easily than the Sanford Noblot pencil did. The aniline dye component weakens the lead slightly as compared with usual clay/graphite leads. The Select™ Indelible pencil writes more darkly and with a slightly broader line than the Noblot did. We suggest sharpening it to a short point, rather than a long one. The body is round, which assists you in continuously turning the pencil during use to keep the lead pointed. Sold individually.

Made in the USA.

https://www.loghelp.com/products/indelible-pencil-sanford-noblot-replacement.asp